If you are having trouble with how to pair skullcandy wireless earbuds, there are a few things you can do.

You can try to find the instructions in the manual. If that does not work, you should reset the your skullcandy earbuds by holding down both buttons for about 10 seconds or pushing earbuds buttons 6 to 8 times

That’s the general method to sort out your pairing problem!

But there are a lot of Skullcandy earbuds with different models, with some changes to pair earbuds to your devices

Useful Tips to Pair Your Earbuds

Step by Step Guide

  1. Make sure your earbuds are charged. If they’re not, plug them in to charge for a bit.
  2. Turn on your Bluetooth connection on your device.
  3. Put your earbuds in pairing mode by holding down the power button until the LED flashes white.
  4. On your device, look for the name of your earbuds. They will typically show up as “Skullcandy” or something similar.
  5. Select the name of your earbuds and they will connect.

If you are still having trouble, try some of the following tips:

1. Make sure your devices are close to each other. They should be within about five feet of each other.

How to Pair Skullcandy Wireless Earbuds

Images Credits: Skullcandy Official Youtube Channel 

2. Turn off and on the devices. A soft reset might be all that’s required to fix the problem. Going into airplane mode with phones is an easy method to accomplish this.

How to Pair Skullcandy Wireless Earbuds

3. Power down likely interferers. Say that faithful Bluetooth speaker usually connects to your earbuds. Turn it off and see if the connection improves.

How to Pair Skullcandy Wireless Earbuds

4. Put your earbuds in pairing mode again, perhaps through the “Forget this device” function on your phone or by unpairing them from another device and then doing a complete factory reset of the earbuds.

How to Pair Skullcandy Wireless Earbuds

How to Pair Skullcandy Wireless Earbuds

This will often clear up any pairing issues and get your earbuds working properly again.

How to Pair Skullcandy Wireless Earbuds

Look for the little symbol in the top corner of your screen. If you do not see it, go into settings and turn it on.

  • Turn your phone to be discoverable. First, go into the settings and turn on the Bluetooth.
  • Two things need to be able to talk to each other. They also need to be close together.
  • Make sure that you turn off and back on your phone. Sometimes it can fix the problem. You can do this by going into airplane mode with your phone.
  • Turn off the things that are trying to connect with the Bluetooth speaker. If you have trouble pairing your phone with the speaker, it could be because it is trying to find its previous partner. Some older devices only try to connect with one device at a time. If Bluetooth was previously paired with something else, turn it off.
  • When you want to pair two devices, make sure that they both have power. Some devices will turn Bluetooth off if the battery is too low. If your phone isn’t pairing with another device, then make sure that they both have enough power and try again.
  • Remove a device from one phone and re-discover it. If your phone can see a device but isn’t receiving data from it, you might want to start over.
  • In iOS

  • You can delete a gadget from your iOS settings by selecting its name and then Forget This Device.
  • In Android settings

  • select a device’s name and then Unpair it. Repeating the process may allow the devices to re-connect.
  • Detach from the Wi-Fi router.

  • Interference from devices utilizing the same spectrum, such as your Wi-Fi router, might be another source of problems during pairing. “Wi-Fi has been designed to handle this, but placing your gadgets too close to the router may not be a good idea.”
  • Remove any USB 3.0 devices from the vicinity. USB 3.0 interference, in addition to its backward compatibility, is a concern.
  • If you’re having trouble connecting your Bluetooth device to your computer, try pairing it somewhere else. USB 3.0 ports on newer laptops, for example, are often faster than USB 2.0 ports, so if the connection isn’t working, consider using a different pair of headphones.
  • Make sure the devices you want to link are compatible with each other. Your gadget has a profile that says what it can connect with, like a headset or another device. You will need to consult your user guide if you are not sure.


Why Can't I Connect My Device to Bluetooth?

Please make sure the following:

  • The devices are close enough to one another (<5 feet).
  • Turn off or disable any other wireless connections on your device including Wi-Fi, Bluetooth, NFC, etc.
  • Turn off power-saving modes.

How Does Bluetooth Work?

A Bluetooth connection is formed when two devices come within range of one another (about 30 feet, depending on obstructions). The transmit device shares data with the receiver via radio frequencies.

Bluetooth connections are too much based on line-of-sight to work well in a noisy environment, behind obstacles or across floors in office buildings.

Furthermore, they have limited throughput – just 1Mbps in low power mode and 2Mbps when fully energized for high speed transmission – so they’re not ideal for heavy use such as streaming video to a TV.

Nevertheless, a Bluetooth connection provides a way to wirelessly transfer everything from photos and contacts between devices to full internet access without dealing with network security settings or passwords.

How Do I Know if My Device Is Compatible with A Certain Frequency of Bluetooth Which?

The most common Bluetooth frequencies are 2.4GHz and 5GHz. If you want to connect to the same frequency as another device, you need to set it in your device’s settings.

For example, if you want to connect your phone, laptop, or tablet with your speaker, the best way is by setting both devices on the same frequency.

However, it’s not possible for two Bluetooth devices with different frequencies to communicate with each other even if they’re close together

Before deciding which Bluetooth frequency you will use for your devices, make sure they are all compatible with one frequency of your choice.

2. Ensure your device is in range of the Bluetooth signal.

How Far Can Bluetooth Go?

If there are any walls or obstacles between your device and Bluetooth, it can interfere with the connection. Try moving closer toward the device to boost the signal strength.

3. Try resetting both devices (if possible) and pair them again.

How to Reset Bluetooth Devices?

If the devices were connected before, they should reconnect after a reset. Sometimes resetting your device can help you connect connectivity problems or pairing issues.

4. If neither Device is in Pairing Mode, try putting one of them into Pairing Mode and then try to pair the other.

How Do I Put a Device Into Pairing Mode?

For most devices, you pull down the notifications screen and tap on the Bluetooth icon. For some newer devices, you go to Settings > Bluetooth > On/Off > Scan for Devices or “Search for Devices”.

5. Check the led indicator light on the device for information regarding connection status.

How to Pair Bluetooth Headphones?

You should always check if your devices are in pairing mode or not by checking the status of LED lights on them one by one.

A blinking blue light indicates that they are ready to pair with each other, but have not yet paired. A blinking purple light indicates that they are in “Pairing Mode” – most likely the earbuds you want to pair with your phone or laptop is ready to pair, but not yet paired. A solid red light may indicate low battery power.

How do I Check my Headphone’s Battery?

A blue light most likely indicates that the device is on.

If you are using Bluetooth headphones with your laptop, check to see if they are set up properly for use with your laptop or desktop computer. Some operating systems may need extra drivers installed before the headphones will work properly.

How do I install Headphone Drivers on my Computer?

You can find the required drivers for your headphones on your manufacturer’s website.

6. Try unpairing your device from all devices, turning off Bluetooth on both devices, and then pairing them again.

How to Unpair Bluetooth Headphones?

If you are having trouble with multiple devices trying to connect to your headphones, you can unpair them from all devices. This will clear any old connections and allow you to start fresh.

7. If you still cannot connect the devices, consult the Bluetooth device’s instruction manual or contact the manufacturer for more support. Click Here to Learn More!

Is there a Bluetooth on/off switch on the device itself?

Many devices have a Bluetooth on/off switch. If your device doesn’t have a Bluetooth on/off switch, you can try turning off your device and turning it back on again.

I hope this guide will serve as a quick reference. IF you like this article hit the newsletter/subscribe button to see our new posts about earbuds and share it with your friends, also gives back your feedback if you like or dislike anything in the comments section. 
thank you.

Did I Miss Anything?

Now i'd like to hear from you:

Please let me know I miss anything Or Maybe I didn’t mention!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *